Minggu, 03 Maret 2019

How to safely wash a car engine

how to-safe-wash-machine-car


Even though it is closed, the car engine area can also be dirty due to dust exposure. Dust can enter from between the hood, or space under the engine that is not closed.

Therefore, the car engine must also be checked and cleaned if the condition is dirty. A clean car engine can make optimal performance. In addition, it is also more pleasing to the eye.

But in cleaning a car engine, it can't be done carelessly. Because in the area of ​​the engine there are many electrical components that are vulnerable to contact with water.

Then how do you wash the car engine properly and safely? As quoted from Suzuki.com, to clean the engine area, the first thing to do is to recognize where the parts of electrical components are stored.
For example the ECU part or fuses.

Before the engine is drenched with water, it is better to cover all the components with plastic, to minimize splashing of water. So if there is a cable that is not wrapped, or the package has been peeled off, wrap it again with insulation so that the water cannot infiltrate.

After that, the washing process can be done immediately. For starters, spray the engine water with low pressure tap water. This method is to remove dust that sticks to the engine or between the hard to reach.

If so, spray the engine degreaser liquid to remove stubborn dirt. After the liquid is evenly distributed on the surface of the machine, brush gently with a soft brush or an unused toothbrush.

The next step, spray back the area of ​​the machine with clean water to remove the remnants of dirt, as well as clean up the soap marks that still stick around the machine.

After cleaning, if the tool is there, spray the parts of the machine that was washed with the wind compressor. This is done to get rid of the remnants of water around the engine.

Well, to avoid the emergence of crusts or watersports, the car engine should not be immediately turned on and the car should not be used immediately. Let the car stand for 2-3 hours to make sure the engine parts dry perfectly.

Finally, turn on the car's engine, while checking all components related to the electrical system. Starting from the lights, horns and others. If there is damage, double-check the part that was protected by plastic or insulation, and make sure everything is dry thoroughly.

0 komentar:

Posting Komentar